Eaton Electrical Extended Battery Module (EBM) 9140 Uživatelský manuál stáhnout pdf (Strana 28)

INSTALLATION

EATON Powerware

9140 EBM User’s Guide S 164201623 Rev A FINAL DRAFT 2006 July 14

11. If installing the optional seismic mounting brackets, align the two

EBM seismic mounting brackets with the screw holes on the sides

of the EBM above the rear mounting brackets. Loosely secure the

brackets with four supplied wing bolts. See Figure 7.

Do not tighten the wing bolts.

Figure 7. Installing the Optional EBM Seismic Mounting Brackets

12. Slide the EBM into the rack. Verify that the rear mounting brackets

engage in and slide easily along the inside of the rails.

13. Secure the front of the cabinet to the rack as shown in Figure 8.

If the r ack holes are square, use two cage nuts. If the rack holes are

round, use two clip nuts.

Position 2 (M5 screw)

Position 8 (M6 screw

and clip/cage nut)

Position 3 (M5 screw)

Figure 8. Securing the Front of the EBM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Žádné komentáře

Eaton Electrical Extended Battery Module (EBM) 9140 Uživatelský manuál Strana 28